Quick Answer

U0358 means: DTC U0358 means there is a loss of communication with the steering angle sensor.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with U0358? Address the issue immediately to ensure safe vehicle operation.

Common Questions

What does U0358 mean and how does it affect my car?

DTC U0358 indicates a loss of communication with your steering angle sensor, crucial for vehicle stability and safety. If this issue arises, your vehicle may experience erratic steering or reduced control, affecting overall safety during driving.

What are the most common causes of U0358 and how much does it cost to fix?

The most common cause of U0358 is a faulty steering angle sensor, with repair costs ranging from $150 to $300. Other causes include wiring issues and software glitches, with varying repair costs depending on the specific problem.

Can I drive my car with U0358 or should I stop immediately?

It's not advisable to drive your vehicle if you have a U0358 code. The loss of communication with the steering angle sensor can lead to safety issues, and it’s best to have the problem diagnosed and repaired as soon as possible.

How can I diagnose U0358 myself using GeekOBD APP?

With the GeekOBD APP, you can retrieve the U0358 code, view freeze frame data, and monitor the status of your steering angle sensor. Follow the app's instructions to perform a thorough diagnostic check.

What vehicles are most commonly affected by U0358?

DTC U0358 is commonly found in vehicles like the 2014-2018 Chevrolet Silverado and GMC Sierra. Always check for recalls or technical service bulletins related to steering components for your specific make and model.

How can I prevent U0358 from happening again?

Regular maintenance, including inspecting wiring and connections for wear and tear, can help prevent U0358. Additionally, keeping your software updated can prevent glitches that affect communication.

What is U0358?

DTC U0358 indicates that the vehicle's onboard diagnostics system has detected a loss of communication with the steering angle sensor. The steering angle sensor is a crucial component in modern vehicles, especially those equipped with electronic stability control (ESC) and advanced driver assistance systems (ADAS). When this code appears, it typically means that the sensor is either malfunctioning or the communication lines are disrupted. This can lead to issues such as erratic steering, reduced stability control performance, and even potential safety hazards during driving. Drivers may notice that the steering feels off or that warning lights activate on the dashboard. If left unaddressed, the problem could escalate, impacting the vehicle's handling and safety features. It’s essential for vehicle owners to understand that such codes are not merely suggestions for repairs but indicators of potential issues that need timely attention to ensure safe driving conditions.

System: U - Network (Communication, CAN Bus)

Symptoms

Common symptoms when U0358 is present:

  • Check engine light is illuminated, indicating a need for diagnostics.
  • Steering feels heavy or unresponsive, making it difficult to steer the vehicle.
  • Stability control warning light activates, suggesting that safety systems may not function correctly.
  • Unusual noises from the steering wheel when turning, indicating potential mechanical issues.
  • Erratic behavior of the vehicle during turns, which can compromise safety.

Possible Causes

Most common causes of U0358 (ordered by frequency):

  1. {'cause': 'Faulty steering angle sensor (70%)', 'details': "The most common cause of DTC U0358 is a malfunctioning steering angle sensor that fails to provide accurate readings to the vehicle's computer."}
  2. {'cause': 'Wiring issues (15%)', 'details': "Damaged or corroded wiring connections between the sensor and the vehicle's ECU can interrupt communication, leading to this code."}
  3. {'cause': 'Software glitches (10%)', 'details': 'Occasionally, the vehicle’s software may have bugs that cause miscommunication with the steering angle sensor.'}
  4. {'cause': 'Steering column issues (3%)', 'details': 'Less commonly, problems within the steering column itself, like misalignment, can cause the sensor to malfunction.'}
  5. {'cause': 'Loose connections (2%)', 'details': 'A loose connector at the sensor or ECU can lead to intermittent communication failures.'}

U0358 Repair Costs

Cost Breakdown by Repair Type

Steering Angle Sensor Replacement

Replacing the faulty steering angle sensor with an OEM part to restore proper communication.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring and connectors to restore communication.

  • Total: $100 - $200
  • Success rate: 80%
Money-Saving Tips for U0358
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional U0358 Diagnosis Process

Follow these systematic steps to accurately diagnose U0358. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Look for visible signs of wear or damage on the wiring and connectors related to the steering angle sensor (5-10 minutes)

Step 1: Initial visual inspection - Look for visible signs of wear or damage on the wiring and connectors related to the steering angle sensor (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all diagnostic trouble codes and check freeze frame data for context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all diagnostic trouble codes and check freeze frame data for context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter to test the voltage and resistance of the steering angle sensor (20-30 minutes)

Step 3: Component testing - Use a multimeter to test the voltage and resistance of the steering angle sensor (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, check the functionality of the steering angle sensor and clear any codes (10-15 minutes)

Step 4: System function test - After repairs, check the functionality of the steering angle sensor and clear any codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to ensure repairs are successful and monitor for any reoccurring codes (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to ensure repairs are successful and monitor for any reoccurring codes (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Angle Sensor Replacement in 2016 Chevrolet Silverado

Vehicle: 2016 Chevrolet Silverado 1500, 75,000 miles

Problem: Customer reported steering felt heavy and stability control light was on.

Diagnosis: Diagnostic scan revealed U0358 code. Visual inspection showed damaged wiring.

Solution: Replaced the steering angle sensor and repaired the wiring harness.

Cost: $320 (Sensor: $200, Labor: $120)

Result: After repair, the vehicle operated normally, and all warning lights were resolved.

Case Study 2: Wiring Issue in 2015 GMC Sierra

Vehicle: 2015 GMC Sierra 1500, 80,000 miles

Problem: Steering angle warning light was illuminated, and customer reported erratic steering.

Diagnosis: U0358 was confirmed via OBD2 scan; wiring inspection revealed corrosion.

Solution: Repaired corroded wires and verified sensor functionality.

Cost: $150 (Labor: $100, Parts: $50 for connectors)

Result: Vehicle returned to normal operation without further issues.

Diagnose U0358

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis

Code Information

Code: U0358
System: Network (Communication, CAN Bus)
Severity: HIGH
Category: Network Codes