U07E1 - Understanding and Fixing U07E1 Code in 2015-2020 Ford F-150 and Other Models

Quick Answer

U07E1 means: The U07E1 code indicates a communication issue between the vehicle's control modules.

Fix: Check and replace faulty components Cost: $500 - $1,200 Time: 90-180 minutes

Can I drive with U07E1? Immediate attention is recommended to prevent further vehicle performance issues.

Common Questions

What does U07E1 mean and how does it affect my car?

The U07E1 code indicates that your vehicle's control modules are having trouble communicating with each other. This can lead to various performance issues, including warning lights, engine hesitation, and malfunctioning electrical features. It's crucial to address this code promptly to maintain vehicle safety and functionality.

What are the most common causes of U07E1 and how much does it cost to fix?

Common causes of U07E1 include faulty control modules, wiring issues, and software glitches. Repair costs can vary widely, typically ranging from $150 for simple wiring repairs to $1,200 for control module replacement. It's best to get a comprehensive diagnostic done to determine the exact issue.

Can I drive my car with U07E1 or should I stop immediately?

While you might be able to drive your vehicle with the U07E1 code, it's not recommended. Continuing to drive can lead to more severe issues and potential safety hazards. It's best to have the issue diagnosed and repaired as soon as possible.

How can I diagnose U07E1 myself using GeekOBD APP?

To diagnose U07E1 with the GeekOBD APP, connect your device to the OBD2 port, run a full system scan, and check for the U07E1 code along with any other codes. Review the freeze frame data for context, and inspect any highlighted components or wiring for visible issues.

What vehicles are most commonly affected by U07E1?

The U07E1 code is frequently found in models like the 2015-2020 Ford F-150, Ford Explorer, and Lincoln Navigator. Always check for any recalls or technical service bulletins (TSBs) that may relate to your specific model.

How can I prevent U07E1 from happening again?

Regular maintenance such as ensuring tight electrical connections, keeping the battery in good condition, and checking for software updates can help prevent the U07E1 code from recurring. Regular inspections of wiring and electronic components will also minimize potential issues.

What is U07E1?

The U07E1 diagnostic trouble code (DTC) is a manufacturer-specific code primarily related to the vehicle’s communication network. It indicates a problem with the vehicle's control modules, particularly with the communication between the modules responsible for various electronic functions. When a vehicle displays the U07E1 code, it typically signifies that the control module is not receiving or sending messages correctly, which can lead to issues such as loss of engine power, warning lights illuminating on the dashboard, and failure of certain electrical components. This code is commonly found in vehicles like the 2015-2020 Ford F-150, Lincoln Navigator, and other models from the Ford lineup, which are equipped with advanced electronic systems and multiple control modules. If not addressed, the U07E1 code can lead to more significant problems, including poor vehicle performance and safety-related issues. Owners may notice difficulties with features like power steering, stability control, or even engine performance, as these systems rely heavily on accurate inter-module communication. Therefore, understanding the implications of the U07E1 code is crucial for maintaining your vehicle's performance and safety.

System: U - Network (Communication, CAN Bus)

Symptoms

Common symptoms when U07E1 is present:

  • Check engine light stays on constantly, indicating a persistent issue with vehicle electronics.
  • Engine hesitates during acceleration, causing a lack of power and responsiveness.
  • Fuel economy decreased by 10-15%, resulting in more frequent visits to the gas station.
  • Dashboard warning lights, such as ABS or traction control, may illuminate unexpectedly.
  • Certain electronic features, like power windows or locks, may malfunction or work intermittently.

Possible Causes

Most common causes of U07E1 (ordered by frequency):

  1. A faulty control module or wiring issue is the most common cause, occurring in approximately 60% of cases. Loose connections or damaged wires can disrupt communication.
  2. Software glitches in the vehicle's programming can also trigger the U07E1 code, especially after updates or repairs. Regular software checks can help prevent these issues.
  3. Poor battery voltage or charging system problems can affect module communication. It's advisable to check the battery condition regularly to prevent such issues.
  4. Less common but serious causes include water intrusion or corrosion affecting module connections, which can lead to extensive electrical failures.
  5. Rare causes may involve hardware failure within the control module, which may require replacement and can be costly.

U07E1 Repair Costs

Cost Breakdown by Repair Type

Control Module Replacement

Replacing a faulty control module that is not communicating properly.

  • Total: $500 - $1,200
  • Success rate: 85%
Wiring Repair

Repairing or replacing damaged wiring or connectors that affect communication.

  • Total: $150 - $600
  • Success rate: 75%
Money-Saving Tips for U07E1
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional U07E1 Diagnosis Process

Follow these systematic steps to accurately diagnose U07E1. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components, focusing on wiring integrity (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components, focusing on wiring integrity (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify the proper operation after repairs, ensuring all modules communicate effectively, and clear any codes (10-15 minutes)

Step 4: System function test - Verify the proper operation after repairs, ensuring all modules communicate effectively, and clear any codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and that no new warnings appear (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and that no new warnings appear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: U07E1 Code Fixed on 2018 Ford F-150

Vehicle: 2018 Ford F-150, 45,000 miles

Problem: Customer reported check engine light and intermittent power steering malfunction.

Diagnosis: After scanning with the GeekOBD APP, the U07E1 code was retrieved. A visual inspection revealed a damaged wiring harness.

Solution: Replaced the damaged harness and reprogrammed the control module to restore communication.

Cost: $650 (parts: $200, labor: $450)

Result: The repair resolved the issues, and the vehicle passed a follow-up road test without warning lights.

Case Study 2: Electrical Issues Resolved in 2019 Lincoln Navigator

Vehicle: 2019 Lincoln Navigator, 30,000 miles

Problem: Owner experienced multiple dashboard warning lights and reduced engine power.

Diagnosis: GeekOBD APP indicated U07E1, leading to further investigation of the control module connections.

Solution: Repaired loose connections and updated the vehicle software.

Cost: $300 (parts: $50, labor: $250)

Result: Post-repair, all warning lights cleared, and vehicle performance returned to normal.

Diagnose U07E1

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: U07E1
System: Network (Communication, CAN Bus)
Severity: HIGH
Category: Network Codes