U0914 - Understanding the U0914 Code for 2013-2018 Ford F-Series and Other Models

Quick Answer

U0914 means: The U0914 code indicates a communication error between the Body Control Module and other modules in the vehicle.

Fix: Check and replace faulty components Cost: $100 - $300 Time: 90-180 minutes

Can I drive with U0914? It's important to diagnose and repair this issue as soon as possible to prevent further complications.

Common Questions

What does U0914 mean and how does it affect my car?

The U0914 code indicates a communication error within your vehicle's electrical system. This can lead to problems with various components such as lights and locks, affecting overall vehicle performance. It's essential to address this issue to avoid further complications.

What are the most common causes of U0914 and how much does it cost to fix?

Common causes include damaged wiring, a faulty Body Control Module, and electrical interference. Repair costs can range from $100 to $800, depending on the specific issue.

Can I drive my car with U0914 or should I stop immediately?

While you may be able to drive your vehicle, it is advisable to address the U0914 code promptly. Ignoring it could lead to more severe issues and potentially affect your safety.

How can I diagnose U0914 myself using GeekOBD APP?

To diagnose U0914 using the GeekOBD APP, connect the device to your vehicle's OBD2 port, run a scan, and check for any related codes. Look for freeze frame data to help identify when the problem occurs.

What vehicles are most commonly affected by U0914?

Commonly affected vehicles include the 2013-2018 Ford F-Series, as well as certain models from Chevrolet and GMC. Always check for recalls or Technical Service Bulletins (TSBs) related to your specific model.

How can I prevent U0914 from happening again?

Regular maintenance, including inspecting wiring and connectors for wear, can help prevent U0914. Additionally, addressing any electrical issues promptly will reduce the likelihood of this code appearing in the future.

What is U0914?

The DTC U0914 code is a communication error indicating that the Body Control Module (BCM) is having trouble communicating with the vehicle's other control modules or the network. This issue often arises in vehicles like the 2013-2018 Ford F-Series and can lead to various functional problems. When the BCM cannot communicate effectively, it can affect systems such as the central locking, lighting, and even the engine management system. Drivers may notice symptoms like malfunctioning lights, erratic door locks, or even issues with the engine starting. The U0914 code typically appears when there is a fault in the wiring harness, a faulty BCM, or interference in the communication line. Ignoring this code could lead to further electrical issues and could even prevent the vehicle from starting. It's crucial to address this code promptly to ensure the safety and reliability of your vehicle.

System: U - Network (Communication, CAN Bus)

Symptoms

Common symptoms when U0914 is present:

  • The check engine light may illuminate, indicating a potential electrical issue.
  • Lights may behave erratically, such as flickering or failing to turn on/off as expected.
  • Door locks may not function properly, leading to difficulties in locking or unlocking the vehicle.
  • The vehicle may experience starting issues, such as the engine failing to crank.
  • Fuel economy may decrease due to improper functioning of various electrical systems.

Possible Causes

Most common causes of U0914 (ordered by frequency):

  1. The most common cause is damaged wiring or connectors, which occurs in about 60% of cases. This typically happens due to wear and tear or corrosion.
  2. A faulty Body Control Module (BCM) can also cause this code to trigger, making up about 25% of cases. This often requires replacement of the BCM.
  3. Electrical interference or shorts in the communication lines can lead to U0914, which can be prevented by regular inspections of the vehicle's wiring.
  4. Less common but serious causes include water damage to the BCM or connectors, potentially leading to significant electrical issues.
  5. A rare cause could be a software glitch in one of the modules, which may require a software update or reprogramming.

U0914 Repair Costs

Cost Breakdown by Repair Type

Wiring Repair

Repairing or replacing damaged wiring or connectors.

  • Total: $100 - $300
  • Success rate: 80%
BCM Replacement

Replacing the Body Control Module if it is faulty.

  • Total: $400 - $800
  • Success rate: 90%
Software Update

Reprogramming or updating software in the control modules.

  • Total: $50 - $150
  • Success rate: 70%
Money-Saving Tips for U0914
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional U0914 Diagnosis Process

Follow these systematic steps to accurately diagnose U0914. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Repair Case Study: 2015 Ford F-150 U0914

Vehicle: 2015 Ford F-150, 65,000 miles

Problem: Customer reported issues with door locks and erratic lights.

Diagnosis: Initial OBD2 scan revealed U0914 alongside other codes. Visual inspection showed corroded wiring.

Solution: Replaced damaged wiring and cleared the code. Conducted a system function test to verify repairs.

Cost: $250 (parts and labor)

Result: All systems returned to normal operation, and the customer reported satisfaction.

Case Study 2: Repair Case Study: 2017 Chevrolet Silverado U0914

Vehicle: 2017 Chevrolet Silverado, 45,000 miles

Problem: Owner experienced starting issues and flickering lights.

Diagnosis: Found U0914 code during OBD2 diagnostics. Further testing indicated a faulty BCM.

Solution: Replaced the Body Control Module and updated software. Conducted comprehensive function tests.

Cost: $650 (including parts and labor)

Result: Vehicle started reliably, and all electrical systems functioned properly after repair.

Diagnose U0914

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: U0914
System: Network (Communication, CAN Bus)
Severity: HIGH
Category: Network Codes