U0B63 - Understanding DTC U0B63: A Guide for 2016-2020 Ford Fusion Owners

Quick Answer

U0B63 means: DTC U0B63 indicates a communication issue between the vehicle's modules, particularly related to the Body Control Module.

Fix: Check and replace faulty components Cost: $400 - $800 Time: 90-180 minutes

Can I drive with U0B63? Immediate attention is recommended to avoid further electronic failures.

Common Questions

What does U0B63 mean and how does it affect my car?

DTC U0B63 indicates a fault in the communication between your vehicle's electronic modules, particularly the Body Control Module. This can lead to problems with electronic features such as lights, locks, and stability control, affecting your vehicle's safety and performance.

What are the most common causes of U0B63 and how much does it cost to fix?

Common causes include a faulty BCM, damaged wiring, or software glitches. Repair costs can range from $150 for wiring repairs to $800 for a BCM replacement, depending on the issue and required parts.

Can I drive my car with U0B63 or should I stop immediately?

It's advisable to address a U0B63 code promptly, as it can affect critical electronic systems. While you may drive short distances, it is best to limit use until repairs are made to prevent further damage.

How can I diagnose U0B63 myself using GeekOBD APP?

Using the GeekOBD APP, conduct a full OBD2 scan to retrieve the U0B63 code and any related codes. Review the freeze frame data for context, check for other simultaneous codes, and visually inspect the wiring and connectors for damage.

What vehicles are most commonly affected by U0B63?

U0B63 is frequently reported in 2016-2020 Ford Fusion models. Owners of these vehicles should be vigilant about electronic performance and any warning light indications.

How can I prevent U0B63 from happening again?

Regularly maintain your vehicle's electrical system by checking for loose connections, avoiding water intrusion, and keeping software updated. Periodic inspections can help catch issues before they escalate.

What is U0B63?

DTC U0B63 is a diagnostic trouble code that indicates an issue with the vehicle's communication network, often related to the Body Control Module (BCM) or other critical systems. This code can trigger warnings related to vehicle stability controls, lighting systems, or other electronic components. Drivers may notice symptoms like dashboard warning lights or irregular behavior in electronic features. The code signifies that there is an inability for certain modules in the vehicle to communicate properly, which can lead to various operational issues. For instance, you might experience problems with your car's automatic lights, door locks, or even the infotainment system. If left unaddressed, this communication failure can lead to further complications, including complete system failures or malfunctions in critical safety features. It’s crucial to diagnose and repair the underlying issues promptly to ensure your vehicle operates safely and efficiently. Addressing DTC U0B63 can involve inspecting the wiring harness, checking connections, and possibly reprogramming or replacing the BCM. Vehicle owners should consult with a qualified technician to accurately diagnose and resolve the issue, as it might require specialized equipment and knowledge of the vehicle's systems.

System: U - Network (Communication, CAN Bus)

Symptoms

Common symptoms when U0B63 is present:

  • The check engine light illuminates, often alongside other warning lights on the dashboard, indicating potential electronic failures.
  • The vehicle experiences intermittent failures in electronic systems, such as power windows or door locks malfunctioning unexpectedly.
  • Drivers may notice delayed responses from the car's infotainment system, including issues with navigation or audio functions.
  • Inconsistent operation of automatic lighting features, leading to headlights or taillights turning on or off unexpectedly.
  • The vehicle may exhibit erratic behavior in stability control systems, resulting in reduced handling performance.

Possible Causes

Most common causes of U0B63 (ordered by frequency):

  1. The most common cause is a faulty Body Control Module (BCM), which accounts for about 60% of U0B63 cases. Issues like water intrusion or electrical shorts can lead to BCM failures.
  2. A second potential cause could be damaged wiring or loose connections, particularly within the vehicle's harness. This can disrupt communication between modules.
  3. Thirdly, software glitches in the vehicle's electronic systems can lead to communication failures. Regular updates and recalibrations can help prevent this.
  4. A less common but serious cause is a failing or incompatible aftermarket accessory that interferes with the vehicle's electronic systems, leading to communication issues.
  5. Rarely, a complete communication failure can stem from issues with the vehicle's central gateway module, which may require complex diagnostic tools to resolve.

U0B63 Repair Costs

Cost Breakdown by Repair Type

BCM Replacement

Replacing the Body Control Module to restore proper communication.

  • Total: $400 - $800
  • Success rate: 85%
Wiring Repair

Repairing damaged wiring or connections that hinder communication.

  • Total: $150 - $300
  • Success rate: 75%
Software Update

Updating the vehicle's software to fix communication bugs.

  • Total: $100 - $200
  • Success rate: 70%
Money-Saving Tips for U0B63
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional U0B63 Diagnosis Process

Follow these systematic steps to accurately diagnose U0B63. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Perform a visual inspection of the wiring harness and connectors associated with the BCM for signs of damage or corrosion (5-10 minutes)

Step 1: Perform a visual inspection of the wiring harness and connectors associated with the BCM for signs of damage or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Utilize the GeekOBD APP to perform a thorough OBD2 scan

Step 2: Utilize the GeekOBD APP to perform a thorough OBD2 scan. Retrieve all codes and freeze frame data to understand the context of the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Conduct component testing using a multimeter to check the BCM and related components for proper voltage and continuity (20-30 minutes)

Step 3: Conduct component testing using a multimeter to check the BCM and related components for proper voltage and continuity (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Run a system function test to verify the proper operation of all electronic features after repairs are made, then clear the codes (10-15 minutes)

Step 4: Run a system function test to verify the proper operation of all electronic features after repairs are made, then clear the codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Complete a road test to ensure that the repairs have resolved the U0B63 code and that all electronic systems function as intended (15-20 minutes)

Step 5: Complete a road test to ensure that the repairs have resolved the U0B63 code and that all electronic systems function as intended (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: BCM Replacement in a 2018 Ford Fusion

Vehicle: 2018 Ford Fusion, 45,000 miles

Problem: Customer reported multiple electronic features failing, including inconsistent lighting and door locks.

Diagnosis: Initial inspection revealed corrosion on the BCM connectors; OBD2 scan confirmed DTC U0B63.

Solution: Replaced the Body Control Module and cleaned all connections.

Cost: $650 (includes parts and labor)

Result: All electronic systems returned to normal operation, and the customer reported no further issues.

Case Study 2: Wiring Repair in a 2017 Ford Fusion

Vehicle: 2017 Ford Fusion, 60,000 miles

Problem: Driver experienced intermittent electronic failures and dashboard warning lights.

Diagnosis: Visual inspection found damaged wiring near the BCM; OBD2 scan confirmed U0B63.

Solution: Repaired the damaged wiring and secured all connections.

Cost: $200 (including labor)

Result: The vehicle's electronics functioned properly post-repair, and no additional codes appeared.

Diagnose U0B63

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: U0B63
System: Network (Communication, CAN Bus)
Severity: HIGH
Category: Network Codes