U0F64 - Understanding the Communication Error in 2016-2020 Ford Fusions and More

Quick Answer

U0F64 means: U0F64 indicates a communication failure between vehicle control modules.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with U0F64? Immediate attention is recommended to prevent further electrical issues.

Common Questions

What does U0F64 mean and how does it affect my car?

The U0F64 code indicates a communication failure between your vehicle's control modules, which can affect various systems such as power windows, lighting, and keyless entry. If ignored, it can lead to further electrical issues, potentially compromising safety and vehicle performance.

What are the most common causes of U0F64 and how much does it cost to fix?

Common causes include damaged wiring (60% of cases), software glitches (25%), and corrosion at connectors. Repair costs can range from $100 for a software update to $800 for BCM replacement, depending on the underlying issue.

Can I drive my car with U0F64 or should I stop immediately?

While you might be able to drive with the U0F64 code, it's not advisable to ignore it. Continuing to drive can lead to further issues in electrical systems, which can become hazardous. It's best to address the problem as soon as possible.

How can I diagnose U0F64 myself using GeekOBD APP?

To diagnose U0F64, use the GeekOBD APP to scan for codes, which will provide you with additional context and freeze frame data. This will help you understand the conditions under which the code occurred and guide your next steps.

What vehicles are most commonly affected by U0F64?

The U0F64 code is frequently reported in 2016-2020 Ford Fusions, as well as other models from Ford and Lincoln. Owners of these vehicles should be aware of this potential issue and keep an eye out for related symptoms.

How can I prevent U0F64 from happening again?

Regular vehicle maintenance, including inspections of wiring and connections, can help prevent U0F64. Avoiding aftermarket installations that could interfere with module communications is also advisable.

What is U0F64?

The U0F64 diagnostic trouble code indicates a communication issue within the vehicle's network, particularly related to the Body Control Module (BCM) and other control modules. This code typically arises when there is a fault in the communication link between modules, which can lead to various operational issues in the vehicle. For instance, if your Ford Fusion, model years 2016-2020, has this code, you might experience problems with power windows, door locks, or even the vehicle's lighting system. The communication failure can stem from damaged wiring, corroded connectors, or even software glitches in the modules themselves. In practical terms, this means that your vehicle may exhibit symptoms like a malfunctioning keyless entry system or erratic cabin lighting. Ignoring this code can lead to further electrical issues and potential safety hazards, making it essential to diagnose and rectify the problem promptly. For vehicle owners, understanding this code can help in addressing symptoms effectively, reducing repair costs, and ensuring the vehicle operates smoothly.

System: U - Network (Communication, CAN Bus)

Symptoms

Common symptoms when U0F64 is present:

  • The check engine light remains illuminated, signaling an underlying issue that needs addressing.
  • Power windows may malfunction, either failing to operate or working sporadically, which can be frustrating for drivers.
  • The vehicle's keyless entry system may not respond, causing inconvenience when trying to unlock or lock the car.
  • Dimming or flickering of interior lights could indicate instability in the electrical system, often tied to the U0F64 code.
  • Erratic behavior of dashboard indicators, such as warning lights turning on/off randomly, can lead to confusion and concern.

Possible Causes

Most common causes of U0F64 (ordered by frequency):

  1. The most common cause is damaged wiring or loose connections, which accounts for approximately 60% of cases. Over time, vehicle wiring can wear due to exposure to the elements or physical stress.
  2. Another common cause is software glitches within the modules, making up about 25% of the cases. Occasionally, a simple software update from the dealership can resolve communication issues.
  3. Corrosion at connectors can lead to poor electrical connections, which is a significant contributor to communication failures. Preventive measures include regular inspections of wiring and connectors, especially in older vehicles.
  4. Less common but serious causes include a failing Body Control Module itself. If this module is malfunctioning, it may need replacement, which can be costly.
  5. A rare but possible cause is interference from aftermarket accessories, such as stereo systems or alarm systems, which can disrupt communication between modules.

U0F64 Repair Costs

Cost Breakdown by Repair Type

Wiring Repair

Repairing damaged wiring or connections that are causing the communication failure.

  • Total: $150 - $300
  • Success rate: 85%
BCM Replacement

Replacing a faulty Body Control Module if it is determined to be the cause of the U0F64 code.

  • Total: $500 - $800
  • Success rate: 90%
Software Update

Performing a software update on the vehicle's modules to resolve communication issues.

  • Total: $100 - $200
  • Success rate: 70%
Money-Saving Tips for U0F64
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional U0F64 Diagnosis Process

Follow these systematic steps to accurately diagnose U0F64. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, which is pivotal for diagnosing the issue (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, which is pivotal for diagnosing the issue (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components, such as the BCM and related modules (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components, such as the BCM and related modules (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes to see if the issue persists (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes to see if the issue persists (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure all systems are functioning as intended (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success and ensure all systems are functioning as intended (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Power Window Malfunction in a 2017 Ford Fusion

Vehicle: 2017 Ford Fusion, 45,000 miles

Problem: Customer reported that the power windows were intermittently working, with the check engine light illuminated.

Diagnosis: After scanning with the GeekOBD APP, U0F64 was identified. A visual inspection revealed frayed wiring near the driver's door.

Solution: Wiring was repaired, and the system was tested successfully. The code was cleared.

Cost: $200 (wiring repair and diagnostic fee)

Result: The windows functioned normally post-repair, and the check engine light remained off.

Case Study 2: BCM Replacement for Lighting Issues in a 2018 Ford Escape

Vehicle: 2018 Ford Escape, 30,000 miles

Problem: Customer complained about flickering interior lights and a malfunctioning keyless entry system.

Diagnosis: The GeekOBD APP revealed U0F64. Testing indicated a faulty Body Control Module.

Solution: The BCM was replaced, and the vehicle was reprogrammed.

Cost: $700 (BCM replacement and programming)

Result: All systems functioned correctly after the repair, with no further issues reported.

Diagnose U0F64

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: U0F64
System: Network (Communication, CAN Bus)
Severity: HIGH
Category: Network Codes