B0584 - Steering Wheel Position Sensor Circuit Malfunction in Common Vehicles

Quick Answer

B0584 means: B0584 indicates a malfunction in the steering wheel position sensor circuit.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with B0584? Immediate attention is recommended to avoid potential steering issues.

Common Questions

What does B0584 mean and how does it affect my car?

B0584 indicates an issue with the steering wheel position sensor, affecting steering responsiveness and potentially compromising safety. If left unaddressed, it may lead to more severe steering issues and can impact systems like stability control.

What are the most common causes of B0584 and how much does it cost to fix?

Common causes include a faulty steering wheel position sensor, which can cost around $150 - $300 to replace. Wiring issues may run $100 - $200, while ECM problems can be more expensive, ranging from $500 - $1,200.

Can I drive my car with B0584 or should I stop immediately?

It’s advisable to stop driving and have your vehicle checked out immediately. Ignoring this code can lead to steering failure, which poses a serious safety risk.

How can I diagnose B0584 myself using GeekOBD APP?

Using the GeekOBD APP, perform a full system scan to check for additional codes and retrieve freeze frame data. This will help you understand the conditions under which the code was triggered and assist in pinpointing the issue.

What vehicles are most commonly affected by B0584?

B0584 is frequently seen in vehicles like the 2010-2015 Ford Fusion, 2011-2016 Honda Accord, and 2013-2017 Chevrolet Malibu. Always check for any recalls or technical service bulletins related to the steering system.

How can I prevent B0584 from happening again?

Regular maintenance checks, especially for the steering system, can help prevent issues. Ensure that wiring is protected from moisture and physical damage, and consider using a quality car cover if parked outdoors.

What is B0584?

The B0584 diagnostic trouble code indicates a malfunction within the steering wheel position sensor circuit. This sensor is crucial for various vehicle systems, particularly in vehicles equipped with advanced driver-assistance systems (ADAS) like lane departure warnings and stability control. When this code is triggered, it typically means that the vehicle's engine control module (ECM) has detected an issue with the signal from the steering wheel position sensor. This could be due to a wiring issue, a faulty sensor, or even a malfunctioning ECM itself. For car owners, this can lead to a range of performance issues, including compromised steering response and stability, which can affect overall driving safety. If you experience this code, it’s advisable to get a professional diagnosis as continued driving with a malfunctioning steering position sensor can lead to more severe issues and safety risks.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0584 is present:

  • The check engine light or ABS warning light may illuminate on the dashboard, alerting you to a potential issue with the steering system.
  • You might notice difficulty in steering responsiveness, with the vehicle feeling less stable, especially during turns or at high speeds.
  • In some cases, there could be erratic or inconsistent steering feedback, making it hard to maintain a straight path on the road.
  • An unusual noise may accompany steering movements, suggesting a mechanical issue connected to the sensor or steering column.
  • In vehicles equipped with ADAS, you may experience malfunctioning of features like lane assist or stability control.

Possible Causes

Most common causes of B0584 (ordered by frequency):

  1. The most common cause of B0584 is a faulty steering wheel position sensor, which has about a 60% likelihood of being the issue. This sensor can wear out over time or fail due to exposure to moisture.
  2. Wiring issues, such as frayed or shorted wires in the sensor circuit, can also trigger this code. This is typically seen in vehicles exposed to harsh conditions or those with high mileage.
  3. Another cause could be a malfunctioning engine control module (ECM). While less common, it can occur due to software issues or internal failures.
  4. Less frequently, steering column damage or misalignment can affect sensor readings, necessitating a thorough inspection.
  5. In rare cases, other related components, such as the power steering pump or rack and pinion, may contribute to the issue, leading to a complex diagnosis.

B0584 Repair Costs

Cost Breakdown by Repair Type

Steering Wheel Position Sensor Replacement

Replacing the faulty steering wheel position sensor to restore proper functionality.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring in the sensor circuit.

  • Total: $100 - $200
  • Success rate: 80%
ECM Reprogramming

Reprogramming or replacing the ECM if it is determined to be the issue.

  • Total: $500 - $1,200
  • Success rate: 75%
Money-Saving Tips for B0584
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0584 Diagnosis Process

Follow these systematic steps to accurately diagnose B0584. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion in the steering column area (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion in the steering column area (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context and any related issues (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context and any related issues (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter to verify the resistance and voltage of the steering wheel position sensor and inspect the wiring for continuity (20-30 minutes)

Step 3: Component testing - Use a multimeter to verify the resistance and voltage of the steering wheel position sensor and inspect the wiring for continuity (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After addressing any issues, verify proper operation of the steering sensor and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - After addressing any issues, verify proper operation of the steering sensor and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the steering system operates normally and that the code does not return (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the steering system operates normally and that the code does not return (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Issue Resolved in 2013 Ford Fusion

Vehicle: 2013 Ford Fusion, 75,000 miles

Problem: Customer reported intermittent steering response and a check engine light.

Diagnosis: Performed an OBD2 scan with GeekOBD APP, revealing B0584. Visual inspection found frayed wiring.

Solution: Repaired the damaged wiring and replaced the steering wheel position sensor.

Cost: $250

Result: The repair resolved the issue, and steering responsiveness returned to normal.

Case Study 2: B0584 Code in 2011 Honda Accord

Vehicle: 2011 Honda Accord, 85,000 miles

Problem: Customer experienced warning lights and loss of stability control features.

Diagnosis: Used the GeekOBD APP for diagnostics; B0584 was confirmed, and the steering position sensor was tested.

Solution: Replaced the steering wheel position sensor.

Cost: $200

Result: Stability control features were restored, and the warning lights were cleared.

Diagnose B0584

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0584
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes