B0CBE - Common Issue in 2016-2020 Ford Explorer and Edge Models

Quick Answer

B0CBE means: B0CBE refers to a malfunction in the driver-assistance systems of vehicles, particularly in the sensor or control module.

Fix: Check and replace faulty components Cost: $150 - $600 Time: 90-180 minutes

Can I drive with B0CBE? You should address this code immediately to ensure the safety features of your vehicle are operational.

Common Questions

What does B0CBE mean and how does it affect my car?

The B0CBE code indicates a malfunction in the vehicle's driver-assistance systems, which could affect features like adaptive cruise control and lane-keeping assist. This can lead to reduced safety and functionality while driving.

What are the most common causes of B0CBE and how much does it cost to fix?

Common causes include faulty sensors, damaged wiring, and software issues, with repair costs ranging from $100 to $600 depending on the necessary repairs.

Can I drive my car with B0CBE or should I stop immediately?

It is advisable to address the B0CBE code immediately. Driving with this code can compromise your vehicle's safety features, putting you and other road users at risk.

How can I diagnose B0CBE myself using GeekOBD APP?

Use the GeekOBD APP to perform an OBD2 scan, retrieve codes, and examine freeze frame data. Follow the app's instructions to check for sensor performance and wiring issues.

What vehicles are most commonly affected by B0CBE?

Commonly affected vehicles include the 2016-2020 Ford Explorer and Edge, which are known to experience issues with their ADAS systems leading to the B0CBE code.

How can I prevent B0CBE from happening again?

Regular maintenance of the vehicle's electronics, ensuring sensors are clean and unobstructed, and promptly addressing any warning lights can help prevent future occurrences of the B0CBE code.

What is B0CBE?

The DTC B0CBE indicates a problem related to the vehicle's advanced driver-assistance systems (ADAS), particularly issues with the sensor or control module that manages these features. This code commonly appears in 2016 to 2020 Ford Explorer and Edge models due to malfunctioning sensors or wiring issues. The B0CBE code can result in malfunctioning features such as adaptive cruise control, lane-keeping assist, and collision warning systems. In simpler terms, if you see this code, it means your car's safety features may not work correctly, which can pose risks while driving. Car owners might notice warning lights on their dashboard, and some might experience reduced functionality of these driver aids. Addressing this code promptly is crucial, as it can lead to safety concerns and potential vehicle operation issues. Ignoring the B0CBE code could result in more extensive repairs down the line, making it essential for vehicle owners to understand and address the underlying issues quickly and accurately.

System: B - Body (Airbags, Lighting, Security, Climate Control)

Symptoms

Common symptoms when B0CBE is present:

  • The dashboard warning light for driver-assistance systems remains illuminated, indicating a malfunction.
  • You may notice that features like adaptive cruise control and lane-keeping assist are not responding as expected, impacting your driving experience.
  • There might be a notable increase in the frequency of false alerts or warnings from the collision detection system, making driving stressful.
  • Drivers may experience erratic behavior from the safety systems, such as abrupt braking or steering interventions when not needed.
  • In more severe cases, the vehicle may enter a 'limp mode,' limiting engine power and functionality until the issue is resolved.

Possible Causes

Most common causes of B0CBE (ordered by frequency):

  1. The most common cause of the B0CBE code is a faulty sensor, with a likelihood of 60%. If the forward-facing camera or radar sensor malfunctions, it can trigger this code.
  2. Another potential cause is damaged wiring or connectors, which can lead to intermittent signals. This is often caused by wear and tear or exposure to the elements.
  3. A software issue in the control module may also lead to this code, often requiring a software update or recalibration to resolve the problem effectively.
  4. Less commonly, physical impacts or accidents that damage the ADAS components can cause this code to trigger, necessitating component replacement.
  5. In rare cases, the issue may stem from a failing control module, which is critical for processing data from sensors. This typically requires professional diagnosis and replacement.

B0CBE Repair Costs

Cost Breakdown by Repair Type

Sensor Replacement

Replacing a faulty ADAS sensor, which is often the primary cause of the B0CBE code.

  • Total: $150 - $600
  • Success rate: 80%
Wiring Repair

Repairing or replacing damaged wiring or connectors associated with the ADAS system.

  • Total: $100 - $300
  • Success rate: 70%
Control Module Reprogramming

Reprogramming or updating the ADAS control module if software issues are detected.

  • Total: $50 - $200
  • Success rate: 60%
Money-Saving Tips for B0CBE
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional B0CBE Diagnosis Process

Follow these systematic steps to accurately diagnose B0CBE. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the ADAS sensors (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the ADAS sensors (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, which can help in pinpointing the issue (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, which can help in pinpointing the issue (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the suspected sensors and wiring to ensure proper functionality (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the suspected sensors and wiring to ensure proper functionality (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, verify the proper operation of the ADAS systems and clear codes using the GeekOBD APP (10-15 minutes)

Step 4: System function test - After repairs, verify the proper operation of the ADAS systems and clear codes using the GeekOBD APP (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the repair was successful and that no new codes appear (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the repair was successful and that no new codes appear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Ford Edge ADAS Sensor Replacement

Vehicle: 2018 Ford Edge, 45,000 miles

Problem: Customer reported the adaptive cruise control was not functioning, and the B0CBE code was present.

Diagnosis: After a thorough inspection and OBD2 scan with GeekOBD, it was determined that the front radar sensor was faulty.

Solution: The radar sensor was replaced, and the system was recalibrated using specialized software.

Cost: $450 for parts and labor.

Result: The adaptive cruise control functioned correctly post-repair, and no further codes appeared.

Case Study 2: Repairing Wiring Issues in a Ford Explorer

Vehicle: 2019 Ford Explorer, 30,000 miles

Problem: Customer experienced false alerts from the collision warning system and the B0CBE code was triggered.

Diagnosis: Inspections revealed damaged wiring harnesses connected to the ADAS sensors.

Solution: Wiring was repaired, and connections were secured to prevent future issues.

Cost: $200 for repairs.

Result: The collision warning system performed correctly after repairs, and the B0CBE code did not return.

Diagnose B0CBE

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: B0CBE
System: Body (Airbags, Lighting, Security, Climate Control)
Severity: HIGH
Category: Body Codes