C0063 - Understanding Common in 2015-2020 Ford F-150 and Other Models

Quick Answer

C0063 means: DTC C0063 indicates a malfunction in the left front wheel speed sensor circuit.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with C0063? Immediate attention is recommended as it affects braking performance.

Common Questions

What does C0063 mean and how does it affect my car?

DTC C0063 indicates an issue with your left front wheel speed sensor, which is essential for safe braking and stability. If left unchecked, it can lead to poor braking performance, especially in adverse weather conditions.

What are the most common causes of C0063 and how much does it cost to fix?

Common causes include a faulty wheel speed sensor, damaged wiring, or moisture intrusion. Repair costs typically range from $150 to $300 for sensor replacement, depending on labor and parts.

Can I drive my car with C0063 or should I stop immediately?

While you may be able to drive your vehicle, it is not advisable to ignore DTC C0063. Reduced braking effectiveness can compromise your safety, especially in emergencies.

How can I diagnose C0063 myself using GeekOBD APP?

You can use the GeekOBD APP to scan for the C0063 code, review freeze frame data, and monitor wheel speed sensor readings in real-time to verify their operation.

What vehicles are most commonly affected by C0063?

Commonly affected vehicles include the 2015-2020 Ford F-150, 2016-2019 Chevrolet Silverado, and various Dodge Ram models from the same years. Always check for updates or recalls related to the ABS system.

How can I prevent C0063 from happening again?

Regular maintenance checks, such as inspecting the wheel speed sensors and electrical connections, can help prevent future occurrences of DTC C0063. Keeping the undercarriage clean and free of debris also aids in sensor longevity.

What is C0063?

DTC C0063 is a diagnostic trouble code that indicates a problem within the vehicle's wheel speed sensor system. Specifically, it refers to a malfunction in the left front wheel speed sensor circuit. This sensor is crucial for the vehicle's Anti-lock Braking System (ABS) and Electronic Stability Control (ESC). When this code is triggered, it means that the vehicle's computer has detected an inconsistency in the signals coming from the left front wheel speed sensor. In practical terms, this can lead to decreased braking performance and stability, particularly in wet or slippery conditions. If you’re driving a 2015-2020 Ford F-150, or similar models from manufacturers like Chevrolet or Dodge, you may notice the ABS warning light illuminating on your dashboard, which is a direct indicator of this issue. Ignoring this code can result in more severe braking problems down the line, making it essential to address promptly. Regular maintenance checks can help catch such issues early, ensuring that the wheel speed sensors and associated systems are functioning correctly.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0063 is present:

  • The ABS warning light remains illuminated, indicating a malfunction in the braking system.
  • The vehicle may experience reduced braking efficiency, particularly under hard braking conditions.
  • During acceleration, the engine may shudder or hesitate due to incorrect readings from the wheel speed sensor.
  • You might notice an increase in stopping distance, especially when driving on wet or snowy roads.
  • The traction control system may become less effective, causing difficulty in maintaining control on slippery surfaces.

Possible Causes

Most common causes of C0063 (ordered by frequency):

  1. The most common cause is a faulty wheel speed sensor, which has about a 70% likelihood of being the issue. This sensor can wear out due to exposure to road debris and harsh conditions.
  2. Another common cause is damaged wiring or connectors in the wheel speed sensor circuit, leading to poor signal transmission. This is a technical issue that often arises from corrosion or physical damage.
  3. Moisture intrusion in the sensor's electrical connectors can also lead to erroneous readings, making it essential to check for signs of water damage.
  4. A malfunctioning ABS control module can also trigger this code, although it’s less frequent. This module is responsible for interpreting the signals from the wheel speed sensors.
  5. Lastly, rare instances may involve issues with the vehicle's Engine Control Module (ECM), which can misinterpret the sensor's data due to software glitches.

C0063 Repair Costs

Cost Breakdown by Repair Type

Wheel Speed Sensor Replacement

Replacing the faulty left front wheel speed sensor with a new OEM part.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring or connectors in the sensor circuit.

  • Total: $100 - $250
  • Success rate: 85%
Money-Saving Tips for C0063
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0063 Diagnosis Process

Follow these systematic steps to accurately diagnose C0063. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the left front wheel speed sensor (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion around the left front wheel speed sensor (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data to understand the fault context more thoroughly (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD APP to retrieve all codes and freeze frame data to understand the fault context more thoroughly (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specialized diagnostic tools to test the left front wheel speed sensor and its circuit for proper voltage and continuity (20-30 minutes)

Step 3: Component testing - Use a multimeter or specialized diagnostic tools to test the left front wheel speed sensor and its circuit for proper voltage and continuity (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After performing any repairs, verify the ABS and traction control systems are functioning correctly and clear any codes (10-15 minutes)

Step 4: System function test - After performing any repairs, verify the ABS and traction control systems are functioning correctly and clear any codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the repairs resolved the issue and that the ABS light remains off (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the repairs resolved the issue and that the ABS light remains off (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: 2018 Ford F-150 Wheel Speed Sensor Replacement

Vehicle: 2018 Ford F-150, 30,000 miles

Problem: Customer reported ABS light on and decreased braking performance.

Diagnosis: Utilized GeekOBD APP to confirm C0063 code. Visual inspection revealed corrosion at the sensor connector.

Solution: Replaced the left front wheel speed sensor and cleaned the connector. Updated software in the ABS module.

Cost: $250 (sensor: $150, labor: $100)

Result: ABS light turned off, and customer reported improved braking performance.

Case Study 2: 2017 Chevrolet Silverado Wiring Repair

Vehicle: 2017 Chevrolet Silverado, 45,000 miles

Problem: ABS warning light was on, and traction control was disabled.

Diagnosis: Scanned for codes and found C0063. Inspected wiring and discovered a short in the harness.

Solution: Replaced damaged wiring and secured connections. Cleared codes and tested the system.

Cost: $200 (wiring repair: $100, labor: $100)

Result: ABS and traction control systems functioned normally post-repair.

Diagnose C0063

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0063
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes