C0067 - Steering Angle Sensor Fault in Common Vehicles Like Honda Accord and Toyota Camry

Quick Answer

C0067 means: C0067 indicates a fault in the steering angle sensor, affecting vehicle stability.

Fix: Check and replace faulty components Cost: $150 - $400 Time: 90-180 minutes

Can I drive with C0067? Immediate attention is recommended to avoid safety risks.

Common Questions

What does C0067 mean and how does it affect my car?

C0067 indicates a problem with the steering angle sensor, which is vital for your vehicle's stability control. If this sensor fails, you may experience issues like erratic steering and reduced traction control, which can compromise safety.

What are the most common causes of C0067 and how much does it cost to fix?

The most frequent cause is a faulty steering angle sensor, usually costing $150 to $400 to replace. Other causes include damaged wiring and ECU software issues, which can have varying repair costs.

Can I drive my car with C0067 or should I stop immediately?

While it's technically possible to drive with C0067, it's not safe. The vehicle's stability and traction control systems may not function correctly, increasing the risk of accidents. It's best to address the issue as soon as possible.

How can I diagnose C0067 myself using GeekOBD APP?

To diagnose C0067 with GeekOBD APP, connect the app to your vehicle's OBD2 port, retrieve the trouble codes, and review the freeze frame data. Pay special attention to the conditions when the code was triggered for accurate diagnosis.

What vehicles are most commonly affected by C0067?

Common vehicles that experience C0067 include the 2014-2017 Honda Accord and the 2015-2019 Toyota Camry. These models often feature advanced safety systems that rely on the steering angle sensor.

How can I prevent C0067 from happening again?

Regular maintenance checks that include inspections of the steering system and electrical components can help prevent C0067. Ensuring proper alignment and addressing any suspension issues promptly is also crucial.

What is C0067?

DTC C0067 refers to a fault in the steering angle sensor, which is crucial for the vehicle's stability control system. This code indicates that the steering angle sensor is not functioning correctly or is sending incorrect signals to the vehicle's control module. The steering angle sensor measures the position of the steering wheel and communicates this data to the electronic control units (ECUs) to help maintain vehicle stability, especially during cornering or evasive maneuvers. A malfunctioning sensor can lead to issues such as the vehicle not responding correctly during turns, potential loss of traction control, and even problems with the anti-lock braking system (ABS). Real-world implications include a reduction in handling capabilities and an increased risk of accidents. Commonly, the C0067 code is seen in vehicles like the 2014-2017 Honda Accord and the 2015-2019 Toyota Camry, particularly those equipped with advanced safety features. If you encounter this code, it's essential to address it promptly to ensure safe vehicle operation.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0067 is present:

  • The check engine light illuminates, indicating a fault that needs addressing.
  • The vehicle may exhibit erratic steering behavior, making it difficult to control during turns.
  • You might notice decreased stability, especially in adverse weather conditions, as the traction control system may not respond appropriately.
  • Your ABS light may also turn on, suggesting that the anti-lock braking system is compromised due to the sensor issue.
  • There could be a noticeable increase in tire wear due to improper alignment that results from the sensor malfunction.

Possible Causes

Most common causes of C0067 (ordered by frequency):

  1. The most common cause is a faulty steering angle sensor, which accounts for about 60% of C0067 occurrences. This can be due to wear and tear or electrical issues.
  2. Another cause is damaged wiring or connectors, which can lead to intermittent faults. Corrosion or loose connections at the sensor can result in the code being triggered.
  3. Poor alignment or suspension issues can also contribute, as they may affect the sensor's calibration over time. Regular inspections can help prevent these problems.
  4. Less common but serious causes include control module failures, which can disrupt communication between the sensor and other systems.
  5. A rare cause is software glitches in the vehicle's ECU, which may require a software update to resolve the issue.

C0067 Repair Costs

Cost Breakdown by Repair Type

Steering Angle Sensor Replacement

Replacing the faulty steering angle sensor with a new OEM part typically resolves the issue.

  • Total: $150 - $400
  • Success rate: 85%
Wiring and Connector Repair

Repairing damaged wiring or connectors may be necessary if these components are found faulty during diagnostics.

  • Total: $50 - $150
  • Success rate: 70%
ECU Software Update

In rare cases, updating the vehicle's ECU software can resolve C0067 if it's caused by software glitches.

  • Total: $100 - $200
  • Success rate: 60%
Money-Saving Tips for C0067
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0067 Diagnosis Process

Follow these systematic steps to accurately diagnose C0067. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check the wiring and connectors around the steering angle sensor for signs of damage or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check the wiring and connectors around the steering angle sensor for signs of damage or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all trouble codes and freeze frame data to understand the context of the fault (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the app to retrieve all trouble codes and freeze frame data to understand the context of the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - With a multimeter, test the steering angle sensor's voltage output while turning the wheel to ensure proper function (20-30 minutes)

Step 3: Component testing - With a multimeter, test the steering angle sensor's voltage output while turning the wheel to ensure proper function (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, clear the codes and verify that the steering angle sensor communicates correctly with the ECU (10-15 minutes)

Step 4: System function test - After repairs, clear the codes and verify that the steering angle sensor communicates correctly with the ECU (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to ensure that the stability and traction control systems are functioning properly (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to ensure that the stability and traction control systems are functioning properly (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Angle Sensor Repair on 2015 Honda Accord

Vehicle: 2015 Honda Accord, 75,000 miles

Problem: Customer noticed the check engine light on along with erratic steering behavior.

Diagnosis: Using the GeekOBD APP, the C0067 code was retrieved, and a visual inspection revealed a damaged steering angle sensor.

Solution: Replaced the steering angle sensor and performed a system function test to ensure proper calibration.

Cost: $350 (including parts and labor)

Result: After the repair, the check engine light cleared, and the steering response returned to normal.

Case Study 2: Connector Repair on 2017 Toyota Camry

Vehicle: 2017 Toyota Camry, 50,000 miles

Problem: Customer reported loss of traction control and ABS warnings appearing on the dashboard.

Diagnosis: The GeekOBD APP showed the C0067 code, and further inspection revealed corroded connectors at the steering angle sensor.

Solution: Cleaned the connectors and repaired damaged wiring to restore proper function.

Cost: $120 (for repairs and diagnostics)

Result: Post-repair, all warning lights cleared, and the vehicle's handling improved significantly.

Diagnose C0067

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0067
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes