C0567 - Understanding DTC C0567: Common Causes and Solutions for Chevrolet and GMC Models

Quick Answer

C0567 means: DTC C0567 indicates a problem with the steering angle sensor or its circuit, affecting vehicle stability control systems.

Fix: Check and replace faulty components Cost: $200 - $400 Time: 90-180 minutes

Can I drive with C0567? Immediate attention is recommended to ensure vehicle safety and performance.

Common Questions

What does C0567 mean and how does it affect my car?

DTC C0567 indicates a problem with the steering angle sensor or its circuit, which is vital for your vehicle's stability control. If unresolved, it can lead to handling issues and decreased safety.

What are the most common causes of C0567 and how much does it cost to fix?

Common causes include a faulty steering angle sensor or damaged wiring, with repair costs ranging from $100 to $400 depending on the specific issue.

Can I drive my car with C0567 or should I stop immediately?

It's advisable to avoid driving your vehicle if you have a C0567 code, as it can lead to compromised handling and increased risk of accidents.

How can I diagnose C0567 myself using GeekOBD APP?

You can use the GeekOBD APP to read the diagnostic codes and monitor sensor data, which will help you understand the issue better before consulting a professional.

What vehicles are most commonly affected by C0567?

This code is frequently found in 2010-2018 Chevrolet and GMC models, such as the Silverado and Sierra, known for their stability control systems.

How can I prevent C0567 from happening again?

Regular vehicle maintenance, including inspecting and cleaning electrical connections and ensuring the steering system is in good condition, can help prevent the recurrence of C0567.

What is C0567?

DTC C0567 is a diagnostic trouble code that indicates a fault in the vehicle's steering angle sensor or the related circuit. This code is commonly found in Chevrolet and GMC models, particularly from the years 2010 to 2018, including popular vehicles like the Chevrolet Silverado and GMC Sierra. When this code is triggered, it means that the Electronic Stability Control (ESC) system has detected an issue that could affect the vehicle's handling and stability. This could lead to a variety of safety concerns, as the ESC system plays a crucial role in maintaining control during slippery or emergency conditions. Drivers may experience symptoms such as the check engine light illuminating or the ESC warning light activating on the dashboard. Ignoring this code can lead to more severe problems, including compromised vehicle safety and performance. As a vehicle owner, it's vital to understand that addressing DTC C0567 promptly is essential not only for the longevity of your vehicle but also for your safety on the road. If you're experiencing this code, it's advisable to seek a professional diagnosis to determine the exact cause and necessary repairs.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0567 is present:

  • The check engine light remains illuminated, indicating there is a fault in the vehicle's stability control system.
  • The Electronic Stability Control (ESC) light may also illuminate, warning the driver that the system is not functioning correctly.
  • Drivers may experience unusual steering or handling issues, such as the vehicle feeling unstable during turns.
  • In some cases, the vehicle may enter limp mode, limiting power and speed to prevent further damage.
  • A noticeable decrease in fuel economy, possibly due to the vehicle's systems compensating for the fault.

Possible Causes

Most common causes of C0567 (ordered by frequency):

  1. The most common cause of DTC C0567 is a faulty steering angle sensor, which has a likelihood of around 60%. This sensor determines the steering wheel's position and is essential for the stability control system's operation.
  2. The second most common cause is damaged wiring or poor connections in the steering angle sensor circuit. This issue can arise due to wear and tear or environmental factors, such as exposure to moisture or road debris.
  3. Another potential cause is a malfunctioning Electronic Control Module (ECM) or a software issue within the vehicle’s onboard systems. Regular software updates can help prevent this, and a scan tool may reveal specific ECM-related codes.
  4. Less common but serious causes include issues with the ABS module, which may also affect the steering angle sensor's operation. Addressing this promptly is crucial to avoid further complications.
  5. Rarely, aftermarket modifications or faulty third-party components can lead to erroneous readings from the steering angle sensor, triggering the C0567 code.

C0567 Repair Costs

Cost Breakdown by Repair Type

Steering Angle Sensor Replacement

Replacing the faulty steering angle sensor to restore proper vehicle functionality.

  • Total: $200 - $400
  • Success rate: 85%
Wiring Repair

Repairing damaged wiring or connections in the steering angle sensor circuit.

  • Total: $100 - $250
  • Success rate: 75%
ECM Software Update

Updating the vehicle's electronic control module to the latest software version.

  • Total: $50 - $150
  • Success rate: 70%
Money-Saving Tips for C0567
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0567 Diagnosis Process

Follow these systematic steps to accurately diagnose C0567. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Perform an initial visual inspection of the steering angle sensor and surrounding wiring for any visible damage or corrosion (5-10 minutes)

Step 1: Perform an initial visual inspection of the steering angle sensor and surrounding wiring for any visible damage or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to scan the vehicle's OBD2 system, retrieving the C0567 code along with any related codes that may provide additional context (10-15 minutes)

Step 2: Use the GeekOBD APP to scan the vehicle's OBD2 system, retrieving the C0567 code along with any related codes that may provide additional context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Test the steering angle sensor with a multimeter to ensure proper voltage readings and functionality (20-30 minutes)

Step 3: Test the steering angle sensor with a multimeter to ensure proper voltage readings and functionality (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Conduct a system function test to verify that the Electronic Stability Control system is functioning correctly after any repairs (10-15 minutes)

Step 4: Conduct a system function test to verify that the Electronic Stability Control system is functioning correctly after any repairs (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test the vehicle under various conditions to ensure that the repairs have resolved the issue and that no warning lights reappear (15-20 minutes)

Step 5: Road test the vehicle under various conditions to ensure that the repairs have resolved the issue and that no warning lights reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Angle Sensor Replacement in 2016 Chevrolet Silverado

Vehicle: 2016 Chevrolet Silverado 1500, 55,000 miles

Problem: Customer reported a persistent check engine light and unstable handling.

Diagnosis: After running diagnostic tests, DTC C0567 was retrieved, indicating a fault in the steering angle sensor.

Solution: Replaced the steering angle sensor and recalibrated the ESC system.

Cost: $350 (parts: $200 for the sensor, $150 for labor)

Result: The repair resolved the warning light issue, and the customer reported improved handling.

Case Study 2: Wiring Repair in 2012 GMC Sierra

Vehicle: 2012 GMC Sierra 1500, 80,000 miles

Problem: Customer experienced intermittent stability control warnings and engine light.

Diagnosis: Inspection revealed damaged wiring in the steering angle sensor circuit, causing the C0567 code.

Solution: Repaired the damaged wiring and secured all electrical connections.

Cost: $150 (parts: $50 for wiring, $100 for labor)

Result: The warning lights cleared, and the vehicle performed normally after the repair.

Diagnose C0567

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0567
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes