C058B - Understanding the Traction Control System Error in 2015-2018 Chevrolet Malibu

Quick Answer

C058B means: C058B indicates a malfunction in the traction control system, affecting vehicle stability.

Fix: Check and replace faulty components Cost: $100 - $250 Time: 90-180 minutes

Can I drive with C058B? It is recommended to address this issue immediately to ensure safe vehicle operation.

Common Questions

What does C058B mean and how does it affect my car?

C058B indicates a malfunction in your vehicle's traction control system, which is crucial for maintaining stability and preventing wheel spin during acceleration. If left unresolved, it can lead to compromised safety and handling, particularly in adverse weather conditions.

What are the most common causes of C058B and how much does it cost to fix?

Common causes include faulty wheel speed sensors, damaged wiring, and software issues. Repair costs can range from $100 for a sensor replacement to $600 for module replacement, depending on the issue.

Can I drive my car with C058B or should I stop immediately?

While it may be possible to drive short distances, it is not advisable to ignore the C058B code. Doing so can compromise vehicle safety and may lead to further damage, especially in slippery conditions.

How can I diagnose C058B myself using GeekOBD APP?

To diagnose the C058B code, connect the GeekOBD APP to your vehicle’s OBD2 port and run a scan. Look for the C058B code along with other related codes, and check the freeze frame data for additional context about the fault.

What vehicles are most commonly affected by C058B?

The C058B code is frequently reported in models like the 2015-2018 Chevrolet Malibu, and some GMC models. Always check for recalls or technical service bulletins (TSBs) related to the traction control system.

How can I prevent C058B from happening again?

Regular maintenance is key. Ensure proper inspections of the traction control system, keep the vehicle's software updated, and address any warning signs promptly to prevent future occurrences.

What is C058B?

The DTC C058B code is associated with the traction control system (TCS) and indicates that there is a malfunction within the system. This code often arises in vehicles like the 2015-2018 Chevrolet Malibu and can lead to various performance issues. When the TCS detects a fault, it triggers the check engine light and may impair vehicle stability, especially during acceleration or on slippery surfaces. The traction control system is designed to enhance safety by preventing wheel spin, which is crucial in adverse driving conditions. If this system is compromised, not only can it affect vehicle handling and safety, but it can also lead to premature wear on tires and other components. Drivers might notice a decrease in acceleration performance or an unusual response from the brakes. As a result, it's vital to address this code promptly to ensure safe vehicle operation and maintain optimal performance. Ignoring the C058B code can lead to further complications down the line, including potential damage to the vehicle's electronic stability control system.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C058B is present:

  • The check engine light remains illuminated, indicating a persistent issue with the traction control system.
  • The vehicle experiences reduced acceleration, especially noticeable when trying to gain speed on wet or slippery roads.
  • Drivers may feel the traction control engaging unexpectedly, leading to a jerky feeling during acceleration.
  • Increased tire wear due to improper traction adjustments, potentially leading to more frequent tire replacements.
  • The ABS (anti-lock brake system) warning light may also appear, indicating a related issue with braking systems.

Possible Causes

Most common causes of C058B (ordered by frequency):

  1. The most common cause of the C058B code is a faulty wheel speed sensor, which can occur in approximately 40% of cases. This sensor monitors the rotation speed of each wheel and communicates with the traction control system.
  2. Another frequent issue is damaged wiring or connectors in the traction control system, typically leading to an electrical fault that can account for around 30% of occurrences.
  3. Software glitches in the vehicle's electronic control unit (ECU) can also trigger the C058B code, which may be resolved through a software update or recalibration of the ECU.
  4. Less commonly, a malfunctioning traction control module can be responsible for the code, which may require replacement and can be serious if not addressed.
  5. Rarely, issues with the brake system, such as a faulty ABS module, can lead to the C058B code being triggered.

C058B Repair Costs

Cost Breakdown by Repair Type

Wheel Speed Sensor Replacement

Replacing a faulty wheel speed sensor to restore proper function of the traction control system.

  • Total: $100 - $250
  • Success rate: 85%
Wiring Repair

Repairing damaged wiring or connectors to ensure proper electrical communication.

  • Total: $75 - $200
  • Success rate: 75%
Traction Control Module Replacement

Replacing the traction control module if it is found to be defective.

  • Total: $300 - $600
  • Success rate: 90%
Money-Saving Tips for C058B
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C058B Diagnosis Process

Follow these systematic steps to accurately diagnose C058B. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Perform an initial visual inspection - Look for damaged wiring, loose connections, or corrosion around the traction control system components (5-10 minutes)

Step 1: Perform an initial visual inspection - Look for damaged wiring, loose connections, or corrosion around the traction control system components (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: Use the GeekOBD APP to perform an OBD2 scan - Retrieve all related diagnostic trouble codes and view freeze frame data to understand the fault context (10-15 minutes)

Step 2: Use the GeekOBD APP to perform an OBD2 scan - Retrieve all related diagnostic trouble codes and view freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Conduct component testing - Utilize a multimeter or specific diagnostic tools to check the functionality of the wheel speed sensors and other related components (20-30 minutes)

Step 3: Conduct component testing - Utilize a multimeter or specific diagnostic tools to check the functionality of the wheel speed sensors and other related components (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: Execute a system function test - After making repairs, verify the proper operation of the traction control system and clear any codes from the ECU (10-15 minutes)

Step 4: Execute a system function test - After making repairs, verify the proper operation of the traction control system and clear any codes from the ECU (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Complete a road test verification - Drive the vehicle under various conditions to confirm that the traction control system is functioning correctly and the code does not reappear (15-20 minutes)

Step 5: Complete a road test verification - Drive the vehicle under various conditions to confirm that the traction control system is functioning correctly and the code does not reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Traction Control System Repair in 2017 Chevrolet Malibu

Vehicle: 2017 Chevrolet Malibu, 60,000 miles

Problem: Customer reported the check engine light was on, and the vehicle felt unstable during acceleration.

Diagnosis: After scanning with the GeekOBD APP, C058B was identified. A visual inspection revealed a damaged wheel speed sensor.

Solution: Replaced the faulty wheel speed sensor. The issue was resolved, and the traction control system functioned correctly.

Cost: $150 (sensor cost: $100, labor: $50)

Result: The customer reported improved handling and no warning lights after the repair.

Case Study 2: Wiring Issue in 2016 Chevrolet Malibu

Vehicle: 2016 Chevrolet Malibu, 55,000 miles

Problem: Customer experienced intermittent traction control failure with the C058B code appearing sporadically.

Diagnosis: Using the GeekOBD APP, the technician found C058B and performed a visual inspection that showed damaged wiring.

Solution: Repaired the wiring harness and ensured all connections were secure.

Cost: $120 (wiring repair: $80, labor: $40)

Result: Post-repair, the traction control system worked flawlessly with no recurrence of the C058B code.

Diagnose C058B

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C058B
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes