C060D - Understanding the Power Steering Control Module Malfunction in Honda and Chevrolet Vehicles

Quick Answer

C060D means: C060D indicates a malfunction in the Power Steering Control Module, affecting steering assistance.

Fix: Check and replace faulty components Cost: $300 - $600 Time: 90-180 minutes

Can I drive with C060D? Immediate attention is recommended to avoid steering failure.

Common Questions

What does C060D mean and how does it affect my car?

The C060D code signifies an issue with the Power Steering Control Module, which is vital for the smooth operation of your vehicle's steering system. When this code is present, you could experience difficulty steering, especially at low speeds, or hear unusual noises when turning. This can lead to increased fatigue while driving and may even result in a complete loss of power steering, making your vehicle dangerous to operate.

What are the most common causes of C060D and how much does it cost to fix?

Common causes of the C060D code include a faulty Power Steering Control Module, wiring issues, and software glitches. Repair costs can vary significantly; replacing the PSCM typically ranges from $300 to $600, while wiring repairs may cost between $100 and $250. Software updates are the most cost-effective solution at $50 to $100.

Can I drive my car with C060D or should I stop immediately?

It is not advisable to drive your vehicle if the C060D code is present, as it indicates a malfunction in the power steering system. This could lead to a total loss of steering assistance, posing a safety hazard. It is best to have your vehicle inspected and repaired as soon as possible.

How can I diagnose C060D myself using GeekOBD APP?

To diagnose C060D using the GeekOBD APP, connect the OBD2 scanner to your vehicle's port and launch the app. Use it to scan for trouble codes and retrieve freeze frame data. Pay special attention to any additional codes that may appear alongside C060D, as these can give you a clearer picture of the issue. The app can also help in monitoring real-time data from the PSCM.

What vehicles are most commonly affected by C060D?

The C060D code is frequently seen in vehicles like the 2014-2018 Honda Civic and the 2015-2020 Chevrolet Silverado. If you own these models, it's important to stay vigilant about any steering issues and get them checked regularly, especially if you experience symptoms associated with this code.

How can I prevent C060D from happening again?

To prevent a recurrence of the C060D code, ensure regular maintenance of your vehicle's power steering system. This includes checking fluid levels, inspecting wiring and connections for wear and tear, and keeping your software updated. If you notice any unusual steering behavior, address it immediately to avoid more substantial repairs down the line.

What is C060D?

The diagnostic trouble code (DTC) C060D indicates a problem with the Power Steering Control Module (PSCM). This module is crucial for the proper operation of the vehicle’s power steering system, which assists in steering the vehicle by augmenting the driver's effort with hydraulic or electric force. When the C060D code is triggered, it means that the PSCM has detected an internal malfunction or a communication issue, often linked to the vehicle's electronic control system. Common vehicles affected by this code include the 2014-2018 Honda Civic and 2015-2020 Chevrolet Silverado. If this code appears, you may notice symptoms like difficulty steering or the steering wheel feeling heavier than usual. Ignoring this code can lead to further issues, including a complete loss of power steering functionality, making it dangerous to drive. It is essential to address the C060D code promptly to ensure safe vehicle operation and to prevent potential damage to the steering system. Regular maintenance and diagnostics can help catch such issues before they escalate.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C060D is present:

  • Steering wheel feels unusually heavy, making it difficult to turn, especially at lower speeds.
  • Check engine light or power steering warning light illuminates on the dashboard, indicating a potential issue.
  • Unusual noises such as whining or grinding when turning the steering wheel, suggesting internal component issues.
  • Intermittent loss of power steering assistance, which can come and go unexpectedly during drives.
  • Increased effort required to steer the vehicle, leading to driver fatigue during longer trips.

Possible Causes

Most common causes of C060D (ordered by frequency):

  1. Faulty Power Steering Control Module (PSCM) - This is the most common cause, with a likelihood of around 60%. It can fail due to electrical issues or internal faults.
  2. Wiring or Connector Issues - Damaged or corroded wiring can disrupt communication between the PSCM and the vehicle's onboard computer, accounting for about 25% of cases.
  3. Software Glitches - Sometimes, outdated or corrupted software in the PSCM can trigger the C060D code, which can be resolved through a software update.
  4. Hydraulic System Problems - Issues with the hydraulic fluid levels or pump can indirectly cause this code to appear, though this is less common.
  5. Rarely, a malfunctioning Steering Angle Sensor may send incorrect data to the PSCM, leading to this trouble code.

C060D Repair Costs

Cost Breakdown by Repair Type

Power Steering Control Module Replacement

Replacing the faulty PSCM with a new or refurbished unit.

  • Total: $300 - $600
  • Success rate: 90%
Wiring Repair

Repairing or replacing damaged wiring or connectors related to the PSCM.

  • Total: $100 - $250
  • Success rate: 80%
Software Update

Updating the PSCM software to resolve glitches.

  • Total: $50 - $100
  • Success rate: 70%
Money-Saving Tips for C060D
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C060D Diagnosis Process

Follow these systematic steps to accurately diagnose C060D. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the PSCM and associated components (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the PSCM and associated components (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - Verify proper operation after repairs and clear codes (10-15 minutes)

Step 4: System function test - Verify proper operation after repairs and clear codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Power Steering Control Module Replacement in a 2016 Honda Civic

Vehicle: 2016 Honda Civic, 45,000 miles

Problem: Customer reported heavy steering and illuminated power steering warning light.

Diagnosis: After scanning with the GeekOBD APP, the C060D code was confirmed along with a visual inspection revealing damaged wiring.

Solution: Replaced the PSCM and repaired the damaged wiring harness.

Cost: $450 (parts: $350 for PSCM, $100 for wiring repair)

Result: Steering assistance was restored, and the warning light no longer appeared post-repair.

Case Study 2: Wiring Repair for C060D in a 2018 Chevrolet Silverado

Vehicle: 2018 Chevrolet Silverado, 30,000 miles

Problem: Customer experienced intermittent loss of power steering while driving.

Diagnosis: Diagnostics revealed the C060D code with additional codes indicating wiring issues.

Solution: Repaired the damaged wiring connections leading to the PSCM.

Cost: $150 (parts: $50 for connectors, $100 for labor)

Result: The vehicle's steering returned to normal functionality, and the customer was satisfied with the repair.

Diagnose C060D

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C060D
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes