C0767 - Understanding the Stability Control Sensor Malfunction in Popular Vehicles

Quick Answer

C0767 means: DTC C0767 indicates a malfunction in the steering angle sensor used by the stability control system.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with C0767? Immediate attention is recommended to ensure vehicle safety.

Common Questions

What does C0767 mean and how does it affect my car?

The C0767 code indicates a malfunction within the steering angle sensor, which is vital for your vehicle's stability control system. If this system isn't functioning correctly, you may experience decreased handling capability and safety risks, particularly during slippery conditions. It's essential to address this issue promptly to ensure your vehicle performs optimally.

What are the most common causes of C0767 and how much does it cost to fix?

The primary cause of C0767 is often a faulty steering angle sensor, which can cost between $150 and $300 to replace. Other common issues include wiring problems that could range from $50 to $150 for repairs. It's advisable to get a full diagnostic to pinpoint the exact cause before proceeding with repairs.

Can I drive my car with C0767 or should I stop immediately?

While you may still drive your vehicle with a C0767 code, it's not recommended, especially if you experience handling issues. Ignoring this code can compromise your vehicle's safety features, increasing the risk of accidents in adverse weather. It's best to have the issue diagnosed and repaired as soon as possible.

How can I diagnose C0767 myself using GeekOBD APP?

To diagnose the C0767 code using the GeekOBD APP, first, connect the app to your vehicle's OBD2 port. Retrieve the trouble codes and examine the freeze frame data for context. Look specifically for any related codes that might indicate additional issues, and use the app's diagnostic features to assess the steering angle sensor's readings.

What vehicles are most commonly affected by C0767?

DTC C0767 is frequently reported in vehicles such as the 2010-2015 Chevrolet Equinox and the 2013-2017 GMC Terrain. However, it may also appear in other models with stability control systems, particularly those manufactured by General Motors during the same timeframe. Always check for any recalls or Technical Service Bulletins related to your specific vehicle.

How can I prevent C0767 from happening again?

Regular maintenance is key to preventing C0767. Ensure that your vehicle's electrical systems are in good condition, and address any signs of wear or damage promptly. Additionally, a yearly inspection of key components like the steering angle sensor can help catch issues before they lead to trouble codes.

What is C0767?

DTC C0767 refers to a malfunction in the stability control system, specifically indicating a problem with the steering angle sensor. This code is commonly seen in various vehicles, including the 2010-2015 Chevrolet Equinox and 2013-2017 GMC Terrain. The steering angle sensor is crucial for the vehicle's stability control system, which helps maintain traction and control during slippery or challenging driving conditions. When this sensor fails or sends incorrect signals, the stability control system may not function properly, potentially leading to reduced vehicle handling and safety. Drivers may notice symptoms such as the stability control warning light illuminating on the dashboard or unusual handling when turning. Ignoring this code can result in further damage to the vehicle's stability systems and increased repair costs. It's essential to address this issue promptly to ensure safe driving conditions and maintain the vehicle's performance. Regular maintenance and proper diagnostics can prevent such issues from recurring, preserving both the vehicle's safety features and the owner's peace of mind.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C0767 is present:

  • The stability control light illuminates on the dashboard, indicating a fault in the system.
  • Drivers may experience unusual handling or difficulty controlling the vehicle, especially on slippery surfaces.
  • Increased wear on tires due to improper traction control management.
  • Loss of traction control functionality, which can lead to skidding in adverse weather conditions.
  • Potentially triggered anti-lock braking system (ABS) warning light due to interlinked systems.

Possible Causes

Most common causes of C0767 (ordered by frequency):

  1. A faulty steering angle sensor is the most common cause, occurring in about 70% of cases. This sensor may wear out or fail due to electrical issues.
  2. Corrosion or poor connections in the wiring harness can cause signal interruptions, impacting the sensor's performance.
  3. Physical damage from hitting potholes or curbs can misalign or damage the sensor, leading to code C0767.
  4. Less common but serious causes include software glitches in the vehicle's control module that affect sensor readings.
  5. Rarely, issues with the vehicle's stability control module itself may lead to incorrect readings from the steering angle sensor.

C0767 Repair Costs

Cost Breakdown by Repair Type

Steering Angle Sensor Replacement

Replacing the faulty steering angle sensor to restore proper function to the stability control system.

  • Total: $150 - $300
  • Success rate: 90%
Wiring Repair

Fixing damaged or corroded wiring that affects sensor performance.

  • Total: $50 - $150
  • Success rate: 80%
Money-Saving Tips for C0767
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C0767 Diagnosis Process

Follow these systematic steps to accurately diagnose C0767. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for any visible signs of damage to the steering angle sensor and its wiring, looking for loose connections or corrosion (5-10 minutes)

Step 1: Initial visual inspection - Check for any visible signs of damage to the steering angle sensor and its wiring, looking for loose connections or corrosion (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD app to retrieve all trouble codes and freeze frame data, providing context to the fault (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Use the GeekOBD app to retrieve all trouble codes and freeze frame data, providing context to the fault (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to verify the functionality of the steering angle sensor (20-30 minutes)

Step 3: Component testing - Utilize a multimeter or specific diagnostic tools to verify the functionality of the steering angle sensor (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After repairs, confirm the proper operation of the stability control system and clear any codes (10-15 minutes)

Step 4: System function test - After repairs, confirm the proper operation of the stability control system and clear any codes (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to ensure the stability control system operates effectively and the C0767 code does not reappear (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to ensure the stability control system operates effectively and the C0767 code does not reappear (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Steering Angle Sensor Replacement on a 2014 Chevrolet Equinox

Vehicle: 2014 Chevrolet Equinox, 75,000 miles

Problem: Customer reported the stability control light was illuminated and the vehicle felt unstable during turns.

Diagnosis: After performing an OBD2 scan, code C0767 was confirmed. A visual inspection revealed a faulty steering angle sensor.

Solution: The steering angle sensor was replaced, and the system was recalibrated. All connections were checked for corrosion.

Cost: $250

Result: Post-repair, the stability control light was cleared, and the vehicle handled normally.

Case Study 2: Electrical Wiring Repair on a 2013 GMC Terrain

Vehicle: 2013 GMC Terrain, 90,000 miles

Problem: Customer noticed a warning light for stability control and experienced difficulty in steering.

Diagnosis: Diagnostic tests revealed code C0767, with a visual inspection showing corroded wiring in the steering angle sensor circuit.

Solution: Damaged wiring was repaired, improving the sensor's signal transmission.

Cost: $100

Result: The warning light was cleared, and the vehicle's handling returned to normal.

Diagnose C0767

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C0767
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes