C1379 - Understanding DTC C1379: Common Issues in 2015-2018 Honda Accord and Toyota Camry

Quick Answer

C1379 means: DTC C1379 indicates a problem with the electronic stability control system, often related to wheel speed sensors.

Fix: Check and replace faulty components Cost: $150 - $300 Time: 90-180 minutes

Can I drive with C1379? Immediate attention is recommended to ensure vehicle safety.

Common Questions

What does C1379 mean and how does it affect my car?

DTC C1379 indicates there is a problem with your vehicle's electronic stability control system, which can affect traction and stability, especially in slippery conditions. Ignoring this code could lead to compromised vehicle safety and handling.

What are the most common causes of C1379 and how much does it cost to fix?

Common causes include faulty wheel speed sensors and brake control modules, with repairs generally ranging from $150 to $800 depending on the issue. Always consult your mechanic for an accurate diagnosis.

Can I drive my car with C1379 or should I stop immediately?

While it may be possible to drive with this code, doing so could compromise your vehicle's handling and safety. It's advisable to seek repairs as soon as possible to avoid potential accidents.

How can I diagnose C1379 myself using GeekOBD APP?

Using the GeekOBD APP, you can perform a full OBD2 scan to retrieve fault codes and freeze frame data. This information will help you understand the conditions under which the C1379 code was triggered.

What vehicles are most commonly affected by C1379?

Commonly affected vehicles include the 2015-2018 Honda Accord and Toyota Camry, among others. It's wise to check for any recalls or technical service bulletins related to your specific model.

How can I prevent C1379 from happening again?

Regular maintenance, including inspections of your vehicle's wiring and sensors, can help prevent the recurrence of DTC C1379. Ensure that your vehicle's software is up-to-date and consider periodic system scans.

What is C1379?

DTC C1379 is a diagnostic trouble code that typically indicates a malfunction within the vehicle's electronic stability control (ESC) or traction control system. This code can arise from various issues, such as a faulty wheel speed sensor, a malfunctioning brake control module, or wiring problems within the ESC system. When this code is triggered, it often leads to the illumination of the check engine light, and in some cases, the vehicle may experience reduced stability or traction control functionality. For drivers of models like the 2015-2018 Honda Accord and Toyota Camry, this can mean an inconsistent driving experience, particularly in adverse weather conditions. It's crucial to address this code promptly, as neglecting it can lead to further complications, such as increased wear on tires or even compromised braking performance. Understanding the implications of DTC C1379 is essential for maintaining vehicle safety and reliability.

System: C - Chassis (ABS, Steering, Suspension)

Symptoms

Common symptoms when C1379 is present:

  • The check engine light illuminates, staying on constantly until the issue is resolved.
  • Drivers may notice that the vehicle's traction control light activates unexpectedly, indicating potential stability issues.
  • The car may exhibit erratic behavior, such as sudden decreases in acceleration power or responsiveness during driving.
  • In some cases, the vehicle may enter a limp mode, where power is significantly reduced to prevent further damage.
  • Drivers might experience a decrease in fuel efficiency, potentially losing 10-15% of normal mileage.

Possible Causes

Most common causes of C1379 (ordered by frequency):

  1. The most common cause of DTC C1379 is a faulty wheel speed sensor, occurring in about 60% of cases. This sensor measures the rotation speed of each wheel and sends the data to the vehicle's control module.
  2. Another prevalent cause is a malfunctioning brake control module, often leading to communication errors within the stability control system.
  3. Wiring issues, such as damaged or corroded harnesses, can also trigger this code, and regular inspections can help prevent these problems.
  4. Less common causes include software glitches within the vehicle's control module, which may require a software update or reset.
  5. In rare cases, a defective ABS (Anti-lock Braking System) pump can lead to this code, necessitating an expensive replacement.

C1379 Repair Costs

Cost Breakdown by Repair Type

Wheel Speed Sensor Replacement

Replacing a faulty wheel speed sensor, which is common for triggering DTC C1379.

  • Total: $150 - $300
  • Success rate: 85%
Brake Control Module Repair

Repairing or replacing the brake control module if it is malfunctioning.

  • Total: $300 - $800
  • Success rate: 75%
Money-Saving Tips for C1379
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional C1379 Diagnosis Process

Follow these systematic steps to accurately diagnose C1379. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion (5-10 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context (10-15 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Component testing - Use a multimeter or specific diagnostic tools to test suspected components like wheel speed sensors (20-30 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: System function test - Verify proper operation after repairs and clear codes using the GeekOBD APP (10-15 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Road test verification - Drive the vehicle under various conditions to confirm repair success (15-20 minutes)
GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: 2017 Honda Accord C1379 Repair

Vehicle: 2017 Honda Accord, 45,000 miles

Problem: Customer reported check engine light and traction control warning light on dashboard.

Diagnosis: An OBD2 scan revealed C1379, and further testing indicated a faulty wheel speed sensor.

Solution: Replaced the defective wheel speed sensor and reset the system.

Cost: $220 (sensor cost + labor)

Result: Post-repair, the dashboard lights turned off, and the vehicle handled correctly.

Case Study 2: 2016 Toyota Camry Stability Control Issue

Vehicle: 2016 Toyota Camry, 60,000 miles

Problem: Driver experienced erratic traction control performance and illumination of the check engine light.

Diagnosis: Diagnostic testing indicated C1379, traced to a malfunctioning brake control module.

Solution: Replaced the brake control module and reprogrammed the vehicle's ECU.

Cost: $650 (module cost + reprogramming)

Result: After the fix, the vehicle's stability control functions were restored.

Diagnose C1379

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: C1379
System: Chassis (ABS, Steering, Suspension)
Severity: HIGH
Category: Chassis Codes