P0583 - Cruise Control Switch Circuit High Input - Common in Ford and GM Vehicles

Quick Answer

P0583 means: The P0583 code refers to a high input signal from the cruise control switch circuit, indicating a malfunction in the cruise control system.

Fix: Check and replace faulty components Cost: $100 - $250 Time: 90-180 minutes

Can I drive with P0583? It is advisable to address this issue soon to ensure safe driving with functional cruise control.

Common Questions

What does P0583 mean and how does it affect my car?

The P0583 code indicates an issue with the cruise control switch circuit, leading to the potential failure of the cruise control system. This can affect your driving experience, especially during long trips, as it may not engage or could disengage unexpectedly, posing a safety risk.

What are the most common causes of P0583 and how much does it cost to fix?

Common causes include a faulty cruise control switch, damaged wiring, or a malfunctioning ECM. Repair costs can vary significantly, from $100 to $1200 depending on the specific issue and required repairs.

Can I drive my car with P0583 or should I stop immediately?

While you can technically drive with the P0583 code, it is advisable to address it soon to ensure your cruise control functions properly and safely. Ignoring the issue may lead to erratic vehicle behavior.

How can I diagnose P0583 myself using GeekOBD APP?

You can use the GeekOBD APP to scan for the P0583 code and retrieve freeze frame data. Check for related codes that can give you context about when the issue occurs. Follow the diagnostic steps to test the cruise control system.

What vehicles are most commonly affected by P0583?

P0583 is frequently seen in Ford vehicles like the 2010-2015 Ford Focus and various GM models from 2003 to 2015. Check for any recalls or technical service bulletins related to your specific vehicle.

How can I prevent P0583 from happening again?

To prevent P0583 from occurring again, ensure regular maintenance of your vehicle’s electrical systems, avoid moisture exposure to the cruise control switch, and perform routine inspections of wiring and connectors.

What is P0583?

The P0583 diagnostic trouble code indicates a problem with the cruise control switch circuit, specifically pointing to a high input signal that could disrupt the cruise control system's functionality. This code is often triggered when the engine control module (ECM) detects an unexpected voltage level from the cruise control switch. Real-world implications of this code may include the cruise control failing to engage, disengaging unexpectedly, or even not functioning at all, leading to potential safety risks while driving. It’s important to address this issue promptly, especially in vehicles where relying on cruise control is common for long-distance driving. Symptoms can vary, and while some drivers might notice the cruise control light illuminating, others may experience erratic behavior while attempting to use the system. Commonly affected vehicles include various models from Ford and GM, particularly those manufactured between 2003 and 2015. Ignoring a P0583 code could lead to further complications, so understanding its meaning and implications is crucial for maintaining vehicle safety and performance.

System: P - Powertrain (Engine, Transmission, Emissions)

Symptoms

Common symptoms when P0583 is present:

  • The cruise control light stays illuminated on the dashboard, indicating the system is active even when it should not be.
  • Cruise control fails to engage or disengages unexpectedly during driving, causing potential safety hazards.
  • Drivers may notice increased fuel consumption due to improper cruise control operation, affecting overall efficiency.
  • The vehicle may exhibit erratic acceleration behavior when cruise control is engaged, leading to an unpredictable driving experience.
  • In some cases, the check engine light may illuminate alongside the cruise control warning indicators.

Possible Causes

Most common causes of P0583 (ordered by frequency):

  1. The most common cause is a faulty cruise control switch, which accounts for around 60% of P0583 occurrences. Issues like wear and tear or moisture infiltration can cause this.
  2. Another potential cause could be damaged wiring or connectors in the cruise control circuit, which may lead to erratic signals being sent to the ECM.
  3. A malfunctioning ECM itself can also trigger the P0583 code, though this is less common. Regular software updates and checks can help prevent this.
  4. Less common but serious causes include short circuits within the cruise control system, which can pose safety risks and require immediate attention.
  5. A rare cause could be interference from aftermarket devices or modifications to the electrical system, potentially leading to incorrect inputs.

P0583 Repair Costs

Cost Breakdown by Repair Type

Cruise Control Switch Replacement

Replacing the faulty cruise control switch, which is the most common repair for P0583.

  • Total: $100 - $250
  • Success rate: 85%
Wiring Repair

Repairing damaged wiring or connections in the cruise control circuit.

  • Total: $50 - $150
  • Success rate: 75%
ECM Replacement

In rare cases, replacing the ECM if determined to be the source of the fault.

  • Total: $500 - $1200
  • Success rate: 60%
Money-Saving Tips for P0583
  • Start with the most common and least expensive repairs first
  • Use GeekOBD APP to confirm diagnosis before replacing expensive parts
  • Consider preventive maintenance to avoid future occurrences
  • Compare prices for OEM vs aftermarket parts based on your needs
  • Address the issue promptly to prevent more expensive secondary damage

Diagnostic Steps

Professional P0583 Diagnosis Process

Follow these systematic steps to accurately diagnose P0583. Each step builds on the previous one to ensure accurate diagnosis.

Step 1: Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion in the cruise control circuit (5-10 minutes)

Step 1: Initial visual inspection - Check for obvious signs like damaged wiring, loose connections, or corrosion in the cruise control circuit (5-10 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 2: Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, including any related codes that may help diagnose the issue (10-15 minutes)

Step 2: OBD2 scan with GeekOBD APP - Retrieve all codes and freeze frame data to understand the fault context, including any related codes that may help diagnose the issue (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 3: Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the cruise control switch and associated wiring for proper operation (20-30 minutes)

Step 3: Component testing - Use a multimeter or specific diagnostic tools to test the cruise control switch and associated wiring for proper operation (20-30 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 4: Step 4: System function test - After performing repairs, verify the proper operation of the cruise control system and clear codes to ensure the issue is resolved (10-15 minutes)

Step 4: System function test - After performing repairs, verify the proper operation of the cruise control system and clear codes to ensure the issue is resolved (10-15 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.
Step 5: Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the cruise control functions correctly (15-20 minutes)

Step 5: Road test verification - Drive the vehicle under various conditions to confirm that the cruise control functions correctly (15-20 minutes).

GeekOBD APP Tip: Use GeekOBD APP to monitor real-time data during this diagnostic step for accurate results and professional-grade analysis.

Important Notes

  • Always verify the repair with GeekOBD APP after completing diagnostic steps
  • Clear codes and test drive to ensure the problem is resolved
  • Address underlying causes to prevent code recurrence

Real Repair Case Studies

Case Study 1: Cruise Control Failure in 2012 Ford Focus

Vehicle: 2012 Ford Focus, 75,000 miles

Problem: Customer reported that the cruise control would not engage and the warning light was on.

Diagnosis: Initial inspection revealed a faulty cruise control switch. A scan showed a P0583 code.

Solution: Replaced the cruise control switch and inspected wiring for damage.

Cost: $150 (including parts and labor)

Result: Cruise control function restored successfully, customer satisfied.

Case Study 2: Intermittent Cruise Control Issues in 2010 Chevrolet Malibu

Vehicle: 2010 Chevrolet Malibu, 85,000 miles

Problem: Customer experienced intermittent cruise control engagement and odd acceleration.

Diagnosis: Diagnostics confirmed a P0583 code. Wiring inspection revealed corrosion.

Solution: Repaired the wiring and cleared the codes.

Cost: $120 (repair and labor)

Result: Cruise control operated smoothly post-repair, customer reported no further issues.

Diagnose P0583

Use GeekOBD APP for professional diagnosis!

  • Real-time data monitoring
  • Advanced diagnostic features
  • Step-by-step repair guidance
  • Professional-grade analysis
Download GeekOBD APP Get MOBD Adapter

Code Information

Code: P0583
System: Powertrain (Engine, Transmission, Emissions)
Severity: MEDIUM
Category: Engine Codes